SL62 Mesh 6m x 2.4m

Description

Overview

SL62 Mesh 6m x 2.4m is a welded steel wire mesh produced to AS/NZS 4671 from Grade 500N (normal ductility) deformed bar, factory-welded at each node for positive load transfer. Used as primary or secondary reinforcing in concrete floor slabs, footpaths, driveways, and retaining wall panels where consistent cover requirements and crack control must be demonstrated to a building surveyor or structural engineer.

Technical Specifications

• Designation: SL62 per AS/NZS 4671
• Wire grade: 500N (500 MPa yield, normal ductility)
• Sheet size: 6,000 mm × 2,400 mm (standard; confirm on label)
• Wire diameter: SL72 = 7.6 mm Ø; SL82 = 8.0 mm Ø (varies by designation)
• Spacing: 200 mm × 200 mm (longitudinal × transverse — standard Remesh)
• Concrete cover: Minimum 30 mm (slab on ground), 40 mm (exposed)
• Compliance: AS/NZS 4671 (steel reinforcing), AS 3600 (concrete structures)

Best Applications

• Residential concrete floor slabs (Class M, H1, H2 sites)
• Driveway and hardstand concrete paving
• Footpath and council infrastructure works
• Retaining wall panels and tilt-up construction
• Pool surrounds and structural base pads

Delivery & Stock

Reinforcing mesh held in standard and heavy-duty grades at BuildBarn, 3 Eastlink Drive, Hallam VIC 3803. 24–48 h Melbourne Metro delivery on full sheets. Flat-deck delivery with crane off-load available for site delivery. Trade pricing available — contact the Hallam warehouse for project quantities.